OTP GPIO Type MCU Series

EM78P153B
 
 
Data Sheet(eng)
Data Sheet(chs)
Package Outline
  - DIP-14
  - SOP-14
  - SSOP-10
 
  General Description

The EM78P153B is an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology. The device has an on-chip 1024e13-bit Electrical One Time Programmable Read Only Memory (OTP-ROM). It provides three protection bits to prevent intrusion of user’s OTP memory code. Fifteen code option bits are also available to meet your special requirements.
With enhanced OTP-ROM features, the EM78P153B provides a convenient method of developing and verifying user’s programs. Moreover, this OTP device offers easy and effective program updates with the use of development and programming tools. You can avail of the ELAN Writer to easily program your development codes.




Features
  • CPU configuration
  • 1K x 13 bits on-chip ROM
  • 32 x8 bits on-chip registers (SRAM, general purpose)
  • 5 level stacks for subroutine nesting
  • Less than 1.5 mA at 5V/4MHz
  • Typically 15µA, at 3V/32kHz
  • Typically 1µA, during Sleep mode
  • I/O port configuration
  • 2 bidirectional I/O ports: P5,P6
  • 12 I/O pins
  • Wake-up port: P6
  • 6 Programmable pull-down I/O pins
  • 7 programmable pull-high I/O pins
  • 7 programmable open-drain I/O pins
  • External interrupt : P60
  • Operating voltage range
  • 2.3V~5.5V at 0°C~70°C (Commercial Grade)
  • Operating frequency range (base on 2 clocks)
  • Crystal mode:

DC ~ 20 MHz / 2clks @ 5V

DC ~ 8 MHz / 2clks @ 3V

DC ~ 4 MHz / 2clks @ 2.3V

The transient point of system frequency between HXT and LXT is 400 kHz.

  • ERC mode

DC ~ 2 MHz / 2clks @ 2.1V

  • IRC mode:

Oscillation mode : 4 / 8 / 1 MHz and 455kHz Process Deviation: Type: Max. ± 3% Temperature Deviation: ± 2% (0 ~ 70°C)

Internal RC Frequency Drift Rate
Temperature( 0°C ~70°C ) Voltage Process Total
4 MHz ±1.5% ±8%@2.3~5.5V ±2% ±11.5%
8 MHz ±1.5% ±8%@3.0~5.5V ±2% ±11.5%
1MHz ±1.5% ±8%@2.3~5.5V ±2% ±11.5%
455kHz ±1.5% ±8%@2.3~5.5V ±2% ±11.5%
  • Peripheral configuration
  • 8-bit real time clock/counter (TCC) with selective signal sources, trigger edges, and overflow interrupt
  • Power on reset and 3 programmable level voltage reset POR: 1.8V (Default), LVR: 4.0, 3.5, 2.7V
  • 2 -/ 4 clocks per instruction cycle selected by code option
  • Three Available Interrupts:
  • TCC overflow interrupt
  • Input-port status changed interrupt (wake-up from sleep mode)
  • External interrupt
  • Special Features
  • Programmable free running watchdog timer
  • Power saving Sleep mode
  • Selectable Oscillation mode
  • Programmable prescaler of oscillator set-up time
  • Package type:
  • 14-pin DIP 300mil : EM78P153BD14
  • 14-pin SOP 150mil : EM78P153BSO14
  • 10-pin SSOP 150mil : EM78P153BSS10