Specification
Overview
-
General Description
The EM88F752N is an 8-bit microprocessor designed and developed with low-power, high-speed CMOS technology. It has an on-chip 2K x 16-bits electrical flash memory. Debug function is built in the EM88F752N chip. User can read the program code from JTAG port and monitor the on chip register status, memory and program trace log on computer. The EM88F752N includes a capacitive touch-sensitive function. The capacitive touch key, a self-contained, is covered with a plastic or glass case. The system controller converts finger data to button presses, depending on finger location and human interface context. Using OCDS, user can develop their program for several flash types IC of ELAN
-
Features & Benefits
-
CPU Configuration
- 2K x 16-bit Flash memory
- (48+256) bytes general purpose register
- More than 10 years data retention
- 8-level stacks for subroutine nesting
- Less than 1.5 mA at 5V/4MHz
- Typically 15 mA, at 3V/16kHz
- Typically 22 mA, at 3V/32kHz
- Typically 1 µA, during sleep mode
- 3 programmable Level Voltage Reset (LVR):2.7V, 1.8V(POR)
- 1 sets of 4 programmable Level Voltage Detector (LVD): 4.5V, 4.0V, 3.3V, 2.2V
- Six CPU operation modes (Normal, Green, Idle, Sleep, TK-Idle TK-Sleep)
-
I/O Port Configuration
- 6 bidirectional I/O ports: P5, P6, P8
- 4 programmable pin change wake-up ports: P5, P6, P8
- 6 programmable pull-down I/O ports: P5, P6, P8
- 6 programmable pull-high I/O ports: P5, P6, P8
- 6 programmable open-drain I/O ports: P5, P6, P8
- 6 programmable high-sink/drive I/O ports: P5, P6, P8
-
Operating Voltage Range
- 2.4V~5.5V at -40°C~85°C (Industrial Grade)
- 2.1V~5.5V at 0°C~70°C (Commercial Grade)
-
Operating Frequency Range
- There are two modes for main and sub clock: Crystal & HIRC mode
- High Crystal mode: DC~20MHz at 4.5V; DC~16MHz at 3.5V; DC~8MHz at 2.1V
- High Internal RC oscillator (HIRC): 4MHz, 6MHz, 8MHz, 12MHz, 16MHz & 20MHz
- Low Crystal mode: 32.768KHz
- Low Internal RC oscillator (LIRC): 16KHz & 128KHz
- TouchKey Frequency: 16MHz, 20MHz & 24MHz
-
Peripheral Configuration
- 8-bit real time clock/counter (TCC) with selective signal sources, trigger edges, and overflow interrupt
- Two Pulse Width Modulation (PWMA, PWMB) with 10-bit resolution shared with Timers A and B
- Three 8-bit timers (TC1/TC2/TC3) with seven modes: Timer/Counter/Capture/Window/Buzzer/PWM/PDO (Programmable Divider Output) modes. TC1+TC2 can be cascaded to one 16-bit counter/timer
- 8+1 channels Analog-to-Digital Converter with 12-bit resolution. One of the channels is 1/2 VDD power detection
- Touch key function 10 traces (Sensor) for 1 group, operating voltage range from 2.4V to 5.5V
- I2C function with 7/10 bits address and 8 bits data transmit/receive mode
- Power down (Sleep) mode
-
21 Available Interrupts: (3 External, 17 Internal)
- Watch timer interrupt
- External interrupt: EINT0, EINT1
- TCC overflow interrupt
- TC1, TC2, TC3 overflow interrupt
- Input-port status changed interrupt
- ADC completion interrupt
- PWMA, PWMB period/duty match completion
- I2C transfer/receive/stop interrupt
- LVD interrupt
- System hold interrupt
- Touch key conversion finish, limit check, error interrupt
-
Single Instruction Cycle Commands
-
Five Kinds of Oscillation Range in Crystal Mode
- HXT1: 20MHz~12MHz
- HXT2: 12MHz~6MHz
- XT: 6MHz~1MHz
- LXT1: 1MHz~100kHz
- LXT2: 32.768KHz
-
Programmable Free Running Watchdog Timer
- Watchdog Timer: 16.5ms±5% with VDD=5V at 25°C, Temperature range ±5% (-40°C~+85°C)
- Watchdog Timer: 16.5ms±5% with VDD=3V at 25°C, Temperature range ±5% (-40°C~+85°C)
- Two clocks per instruction cycle
-
-
Data Sheet
-
Download File
-
-
Package
-
Download File
-
-
Technical Information
-
Website Link
-
